|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
RoHS Compliant Low Noise Amplifier 1.7 - 2.0 GHz Features * * * * * * * * * * * Low Noise Figure: 1.65 dB High Gain: 20 dB Low Power Consumption: 3 to 5 V, 8 mA High Dynamic Range DC Decoupled RF Input and Output No External RF Tuning Elements Necessary Lead-Free Low Cost SOIC-8 Plastic Package 100% Matte Tin Plating over Copper Halogen-Free "Green" Mold Compound 260C Reflow Compatible RoHS* Compliant Version of MAAM12031 MAAL-007673 V1 Functional Schematic GND 8 VDD 7 RF OUT 6 GND 5 Description M/A-COM's MAAL-007673 is a high performance GaAs MMIC low noise amplifier in a lead-free SOIC 8-lead surface mount package. The MAAL-007673 employs a fully monolithic design which eliminates the need for external tuning networks. It can be biased using 3 or 5 volt supplies and has an option for biasing at higher currents for increased dynamic range. The MAAL-007673 is ideally suited for use where low noise figure, high gain, high dynamic range and low power consumption are required. Typical applications include receiver front ends in the Japanese Personal Handy Phone Service (PHS), Private Branch Exchange (PBX) and Personal Communications and Networks (PCS, PCN) markets, as well as standard gain blocks, buffer amps, driver amps and IF amps in both fixed and portable systems. M/A-COM's MAAL-007673 is fabricated using a mature 0.5-micron gate length GaAs process. The process features full passivation for increased performance reliability. 1 2 3 4 GND GND R1 (optional) RF IN Pin Configuration Pin No. 1 2 3 4 Function Ground R1 (Optional) RF Input Ground Pin No. 5 6 7 8 Function Ground RF Output VDD Ground Absolute Maximum Ratings 2,3 Parameter VDD Input Power Current 4 5 Absolute Maximum +10 VDC +17 dBm 30 mA +150C -40C to +85C -65C to +150C Channel Temperature Ordering Information1 Part Number MAAL-007673-000000 MAAL-007673-TR1000 MAAL-007673-TR3000 1. Operating Temperature Storage Temperature Package Bulk Packaging 1000 piece reel 3000 piece reel 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. 4. Only if pin 2 is used to increase current (see note 9). 5. Typical thermal resistance (jc) = +165C/W. Reference Application Note M513 for reel size information. 1 * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant Low Noise Amplifier 1.7 - 2.0 GHz Electrical Specifications6: TA = 25C, VDD = +5 V, Z0 = 50 Parameter Gain Noise Figure Input VSWR Output VSWR Output 1 dB Compression Input IP3 Reverse Isolation Bias Current 6. See plots for 3-volt performance. MAAL-007673 V1 Test Conditions 1.7 - 2.0 GHz, PIN = -30 dBm 1.7 - 2.0 GHz 1.7 - 2.0 GHz, PIN = -30 dBm 1.7 - 2.0 GHz, PIN = -30 dBm 1.7 - 2.0 GHz 1.7 - 2.0 GHz, PIN = -30 dBm 1.7 - 2.0 GHz, PIN = -30 dBm -- Units dB dB Ratio Ratio dBm dBm dB mA Min 18 -- -- -- -- -- -- 5 Typ 20 1.65 1.7:1 1.7:1 7 -1 38 8 Max 22 2.00 -- -- -- -- -- 11 Recommended PCB Configuration Application Schematic 7,8,9 VDD L1 C1 RF IN RF OUT R1 (Optional) See Note 9 7. 8. Component List Part C1 L1 R1 (Optional) Value 500 pF 15 nH 35 to 40 Case Size 0603 0805 0603 Manufacturer Murata Coilcraft Panasonic 9. Pins 1, 4, 5 and 8 must be RF and DC grounded as shown. Pin 3 is the RF input, pin 6 is the RF output. VDD is applied on pin 7. This pin must be bypassed with a 500 pF surface mount MLC capacitor, mounted as close as possible to pin 7, and RF decoupled with a chip inductor having a minimum value of 15 nH (as shown in the Recommended PCB Configuration). Pin 2 allows use of an external resistor to ground for optional, higher current bias. For nominal current operation no resistor is used. For optional 20 mA current operation, connect a 35 to 40 ohm chip resistor (as show in the Recommended PCB Configuration). 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant Low Noise Amplifier 1.7 - 2.0 GHz Typical Performance Curves Gain @ +25C 24 3 VOLTS, 8mA 5 VOLTS, 8mA 5 VOLTS, 20mA MAAL-007673 V1 Noise Figure @ +25C 1.9 3 VOLTS, 8mA 5 VOLTS, 8mA 5 VOLTS, 20mA 22 1.8 20 1.7 18 1.6 16 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 1.5 1.7 1.8 1.9 2.0 Frequency (GHz) Frequency (GHz) VSWR @ 5 V, 8 mA, +25C 3.0 Input IP3 @ +25C 2 INPUT 2.5 OUTPUT 0 -2 2.0 3 VOLTS, 8mA 5 VOLTS, 8mA 5 VOLTS, 20mA -4 1.5 -6 1.0 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 -8 1.7 1.8 1.9 2.0 Frequency (GHz) Frequency (GHz) Gain @ 5 V, 8 mA 24 +25 C -40 C +85 C Noise Figure @ 5 V, 8 mA 2.4 +25 C -40 C +85 C 22 2.1 20 1.8 18 1.5 16 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 1.2 1.70 1.75 1.80 1.85 1.90 1.95 2.00 Frequency (GHz) 3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. Frequency (GHz) * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant Low Noise Amplifier 1.7 - 2.0 GHz Lead-Free SOIC-8 MAAL-007673 V1 Reference Application Note M538 for lead-free solder reflow recommendations. Additional information is available in Application Note M540, "M/A-COM GaAs MMIC LNA SOIC-8 Platform". Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 4 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. |
Price & Availability of MAAL-007673-TR3000 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |